· Benkal/Supermarket Shelving System is a total solution design that is manufactured by Taqaddom. It guarantees total flexibility according to customer’s needs and latest international recommendations (25 mm system). It is subject to a quality management system meeting the technical and engineering requirements and International specifications.
· All our metal products are painted with Electrostatic Powder Coating (EPOXY) using a special automatic painting system; this has curing and stoving ovens after 4 stages of cleaning by special chemical materials, hot water, Phosphate and DI water.
· Taqaddom Benkal/Supermarket shelving System has been widely utilized by thousands of supermarkets, retail and shopping malls in Palestine and other countries.
· Main applications include: supermarket, retailers, shops and many others.
· This system is an ideal solution for light-duty storage capacity and its advantages are:
More selectivity: stores different products on each level
More capacity: significantly increases shelf density
Total Flexibility: each shelf is independent and adjusted every 25 mm
Fast operation: goods are accessed from aisle
Lower Costs: no lost travel time entering racks
Efficiency: optimum visibility and accessibility
- Benkal Uprights are made of metal squared pipes 50/50 mm, 2 mm thick.
- Uprights are provided with special perforations in order to connect legs (25-60 cm long) made of CR metal sheet of 1.8 mm thick. The upright and the leg are both provided with adjustable 12 mm feet to balance it firmly on the floor.
- These legs are 20 cm high, it carries the bottom shelf, and holds the bottom panel.
- Benkal Uprights are perforated in the front side every 25 mm, according to the latest designs in the world. The top side of the upright has a plastic cap on the top.
- Uprights can either be mounted to the wall (single side), or installed in the middle as (double-sided) arrangement.
- Shelves are provided with triple side bends to guarantee safety and work efficiency.
- Shelves are made of CR metal sheets, 1 mm thick, provided with reinforcement metal bar(s) welded in the middle of the shelf by automatic “Spot Welding” machines.
· Shelves are quite flexibly assembled or disassembled by pressing it firmly over its right and left consoles, it can be installed quickly and easily.
· Shelves are provided with side bends in order to be installed over the consoles firmly, quickly and easily.
· Shelves have round bends in the back to guarantee safety and work efficiency
· Shelves can be decorated with a front edge as a label slot for labelling, sorting and pricing.
· Each shelf can carry up to 100 kg of distributed weight.
· Consoles (triangles) are the holders of the shelves; they are 2 models:
- Double: made of CR steel of 1.8 mm thick where every 2 shelves share 1 console, it has 8 joining notches connected through the perforated holes inside the column, and 6 small notches for safety.
- Single: made of CR steel of 3 mm thick where each shelf is independent, it has 4 joining notches connected through the perforated holes inside the column, and 3 small notches for safety.
· Consoles can carry loads of more than 300 kg.
- Double sided arrangement is equipped with partitioning sheets, which is connected between each 2 uprights. It joins the uprights together firmly and protects the uprights and whole system from swivelling or collapsing. At the same time it prevents goods from mixing up.
- Partitioning sheets are made of separation sheets of 40 cm and 60 cm height, 1 mm thick steel, can be perforated in order to give nice and stylish finish or for hanging products using wire hooks.
- Full engineering and CAD/CAM simulation design support.
